There are a few motors listed on that link. Which one? It doesn't list information on any encoder. Is there one?
But most any 3 phase brushless should work with less than 12.5A cont. and 80V
Do you really need that power and speed for a telecope?
Do you have prices?
Regards
TK
| Group: DynoMotion |
Message: 5937 |
From: ancient.arrow |
Date: 10/31/2012 |
| Subject: Re: 400W 48V Brushless DC Motor & SnapAmp |
Its a 24" reflector with some accessories on it so high moment of inertia.
I will be using a 20,000 ppr encoder on the shaft of each axis. I was looking at the 400w model.
--- In DynoMotion@yahoogroups.com, Tom Kerekes <tk@...> wrote:
>
> There are a few motors listed on that link. Which one? It doesn't list information on any encoder. Is there one?
> Â
> But most any 3 phase brushless should work with less than 12.5A cont. and 80V
> Â
> Do you really need that power and speed for a telecope?
> Â
> Do you have prices?
> Â
> Regards
> TK
>
>
> ________________________________
> From: ancient.arrow <ancient.arrow@...>
> To: DynoMotion@yahoogroups.com
> Sent: Thursday, October 25, 2012 4:09 PM
> Subject: [DynoMotion] 400W 48V Brushless DC Motor & SnapAmp
>
> Â
> I am pondering building a telescope mount with a couble of these motors.
>
> Is this motor: http://kinavo.en.alibaba.com/product/607454493-213875250/400W_48V_Brushless_DC_Motor.html
>
> a viable candidate for use with a single SnapAmp?
> |
|
